SHAPE 40-inch C-Stand Turtle Base Kit

The SHAPE 40-inch C-Stand Turtle Base Kit is a black anodized aluminum support stand for photographers, filmmakers, studios, and grip crews who need a 9.7 ft working height and 25 lb load capacity. Available in Canada from Filmgear Canada, the kit includes a removable turtle base, grip heads, a 40-inch arm, cable clips, and removable rubber feet.

Product Overview

This camera C-Stand combines a 55-inch minimum and folded height with a maximum height of 9.7 ft / 296 cm. The removable turtle base accepts an optional 2K pin for low-angle setups, while the top of the stand supports 5/8-inch baby-pin accessories. A sliding leg helps the stand adapt to uneven surfaces, and the legs nest with other C-stands to reduce floor space during transport and storage. Damped spring risers, captive knobs, and aluminum locking collars improve daily grip workflow.

Key Features

25 lb support capacity

The stand supports up to 25 lb / 11 kg for flags, silks, bounce cards, small fixtures, and other grip accessories within the rated load.

9.7 ft maximum height

The three-section stand reaches 9.7 ft / 296 cm and folds to 55 inches / 140 cm. That range supports overhead diffusion, flags, and elevated accessory placement on studio or location sets.

Removable turtle base

The turtle base can be removed and used with an optional 2K pin for near-floor positioning. The stand also nests with other C-stands to conserve space in grip trucks and storage rooms.

Included grip arm and heads

The 40-inch arm and grip heads provide positioning control for flags, gels, bounce materials, and silks. Two cable clips help keep power and signal runs organized around the stand.

Set-friendly hardware

Damped spring risers reduce the risk of pinched hands when sections are lowered. Captive knobs stay attached during transport, and removable rubber feet help protect finished floors.

How It Compares

The SHAPE kit uses black anodized aluminum, a removable turtle base, and a sliding leg. The FPS 40-inch Master C-Stand Sliding Leg Kit is the closer Filmgear alternative for buyers who prefer a stainless-steel silver stand. A conventional light stand is faster for a small fixture, but it does not provide the same grip-arm positioning for flags and diffusion.

Who Is This For?

This 40-inch C-Stand is suited to photo studios, film crews, interview teams, grip departments, rental houses, and content studios that regularly position flags, silks, gels, reflectors, or compact lights.

Who Should Choose Something Else?

Choose a smaller baby C-Stand for tight rooms and lighter travel kits. Choose a heavier steel stand when maximum mass and rigidity matter more than transport weight, or a taller combo stand when the load requires a junior receiver and more working height.

In the Box

• 1x SHAPE 40-inch C-Stand
• 1x removable turtle base
• 1x 40-inch grip arm
• Grip heads
• 2x cable clips
• Removable rubber feet

Specifications

• Material: black anodized aluminum
• Load capacity: 25 lb / 11 kg
• Minimum height: 55 inches / 140 cm
• Maximum height: 9.7 ft / 296 cm
• Folded height: 55 inches / 140 cm
• Top mount: 5/8-inch baby-pin accessories
• Base compatibility: optional 2K pin accessories
• Product weight: 9.53 kg
• SKU: TSB40

FAQ

How much weight can the SHAPE 40-inch C-Stand hold?
The stand is rated for a maximum load of 25 lb / 11 kg. Always balance the load correctly, tighten each section, and use suitable ballast based on the set conditions.

How tall is the SHAPE TSB40 C-Stand?
It reaches a maximum height of 9.7 ft / 296 cm. Its minimum and folded height are both 55 inches / 140 cm, which is important when planning vehicle and storage space.

What is included with the C-Stand kit?
The kit includes the stand, removable turtle base, 40-inch grip arm, grip heads, two cable clips, and removable rubber feet. The arm and heads support common flag, silk, gel, and bounce-card setups.

Can the turtle base be removed?
Yes. The base is removable and can accept an optional 2K pin for low-angle positioning. The stand top is compatible with 5/8-inch baby-pin accessories.

Is this C-Stand suitable for uneven floors?
The sliding leg helps level the stand on uneven surfaces and steps. The removable rubber feet can also protect finished studio floors during setup.

Where can I buy a SHAPE C-Stand in Canada?
Filmgear Canada offers the SHAPE 40-inch C-Stand Turtle Base Kit with Canada-wide shipping and support from Vancouver for grip, film, and studio customers.

Where to Buy in Canada

Buy the SHAPE C-Stand in Canada from Filmgear Canada, with Canada-wide shipping and Vancouver support. This oversized item may require a separate shipping quote or surcharge depending on destination.