Sachtler aktiv6 flowtech75 MS Tripod System

The Sachtler aktiv6 flowtech75 MS is a professional video tripod system with carbon-fibre legs, an aktiv6 fluid head, Sideload plate, 75mm SpeedSwap base, mid-level spreader, carry handle, and padded bag. It supports camera builds up to 8kg, provides 15 counterbalance steps and three drag settings, and covers low-angle through standing-height production setups.

Product Overview

Sachtler rates the complete system for camera payloads from 0 to 8kg at a 100mm centre of gravity. The aktiv6 head provides 15 plus zero counterbalance steps, three plus zero drag settings, a 120mm sliding range, and a +90 to -70 degree tilt range. SpeedLevel allows the head to be levelled without reaching under the bowl, while SpeedSwap supports faster moves between compatible supports. The two-stage carbon-fibre flowtech75 aktiv legs use quick-release brakes and work with the included mid-level spreader. System height is listed from 23 to 170cm without the spreader and 79 to 174cm with it.

Key Features

0 to 8kg Professional Payload Range

The aktiv6 head is specified for medium camcorder and digital cinema builds up to 8kg, with 15 counterbalance steps for balancing different camera, lens, battery, and accessory combinations.

SpeedLevel and SpeedSwap Support

The 75mm aktiv base allows quick head levelling and faster transfer to compatible sliders or other supports without a conventional under-bowl clamp.

Two-Stage Carbon-Fibre flowtech Legs

Quick-release brakes, a mid-level spreader, wide height coverage, and low-angle capability support documentary, corporate, news, commercial, and location production.

How It Compares

Choose aktiv6 when the complete camera build remains within the 8kg payload and three drag settings are sufficient. Choose the aktiv8 flowtech75 system for builds up to 12kg and seven drag settings, or a different bowl and leg class when the camera package, height, environment, or support interface requires it.

Compatible Accessories and Related Gear

Sachtler aktiv8 flowtech75 MS system. Balance the total camera, lens, plate, battery, matte box, monitor, cable, and accessory weight against the 8kg rating. SpeedSwap transfers require a compatible receiver or slider setup, and the Sideload plate, bowl interface, spreader position, floor surface, and operating height should be checked for the production plan.

Who Is This For?

This tripod system is for documentary, corporate, broadcast, news, education, rental, and cinema crews that need fast setup, repeatable fluid movement, low-angle access, and a portable professional support package.

Who Should Choose Something Else?

Choose aktiv8 for heavier camera builds or finer drag selection, a 100mm system for a larger support class, a ground-spreader kit for flat controlled floors, or a lighter travel tripod when packed size matters more than production payload and speed.

In the Box

• Sachtler aktiv6 fluid head with Sideload plate S and one pan bar
• flowtech75 aktiv two-stage carbon-fibre tripod
• flowtech75 mid-level spreader
• flowtech rotating carry handle
• flowtech attachment mount
• Sachtler padded bag 75

Specifications

• System SKU: S2064S-FTMS
• Payload at 100mm centre of gravity: 0 to 8kg
• Counterbalance: 15 plus 0 steps
• Drag: 3 plus 0 settings
• Bowl: 75mm SpeedSwap base
• Camera fitting: Sideload S
• Sliding range: 120mm
• Tilt range: +90 to -70 degrees
• System weight: 6.2kg
• Tripod: two-stage carbon fibre
• Height without spreader: 23 to 170cm
• Height with mid-level spreader: 79 to 174cm
• Transport length: 85cm

FAQ

How much camera weight can the Sachtler aktiv6 system support?
Sachtler specifies a 0 to 8kg payload range at a 100mm centre of gravity. Add the camera, lens, battery, plate, monitor, matte box, cables, and every mounted accessory when checking the build.

What is the difference between aktiv6 and aktiv8?
The aktiv6 is rated to 8kg with three plus zero drag settings. The aktiv8 is rated to 12kg and provides seven plus zero drag settings for heavier builds and finer movement adjustment.

How low and high can the flowtech75 MS system operate?
Sachtler lists 23 to 170cm without the spreader and 79 to 174cm with the mid-level spreader. Camera height also depends on the head, plate, and camera build.

What do SpeedLevel and SpeedSwap change on set?
SpeedLevel lets the operator level the aktiv head without reaching under the bowl. SpeedSwap lets the head move to a compatible receiver or slider setup more quickly, provided the other support has the required interface.

Where can I buy the Sachtler aktiv6 flowtech75 MS in Canada?
Filmgear Canada supplies the aktiv6 flowtech75 MS with Canada-wide shipping and Vancouver-based help for payload, plate, spreader, slider, transport, and support planning.

Where to Buy in Canada

Buy Sachtler aktiv6 flowtech75 MS Tripod System from Filmgear Canada with Canada-wide shipping and Vancouver-based support. Confirm the exact signal, connector, power, support, and accessory plan before ordering.