What Is a Nanlite NANLINK Transmitter Box Used For
By Filmgear Canada | Published: 2026-10-24
Category: Product Reviews
Learn what a Nanlite NANLINK transmitter box does, how it simplifies DMX cabling, and when it's the right tool for controlling your LED lights.
Quick Answer
The Nanlite NANLINK WS-TB-1 transmitter box lets you control NANLINK-compatible LED lights from a wired DMX console without running DMX cable to every fixture. It bridges your lighting desk to a group of lights, simplifying cabling on stages and venues.
When does the WS-TB-1 make sense?
If you already work with a DMX console and your lights are spread across a stage or venue, the WS-TB-1 can save you from running a long DMX cable to each fixture. Instead, you run one DMX line to the transmitter box, and it relays control to the NANLINK group wirelessly.
This setup is especially useful in temporary installs, rented venues, or any situation where you want to reduce cable clutter and speed up setup.
What are the limitations?
The WS-TB-1 is not a full wireless DMX system for every light. It only works with Nanlite fixtures that have built-in NANLINK. If your lights are not NANLINK-compatible, you would need a separate receiver for each fixture or a different control method.
Also, the transmitter box still needs its own power and DMX cable, so you are not completely cable-free. You are just reducing the number of DMX runs.
Frequently Asked Questions
- How does the WS-TB-1 connect to my DMX console?
- You connect the WS-TB-1 to your DMX console with a standard DMX cable (sold separately). The box then transmits control signals to your NANLINK-compatible lights.
- Do I need a separate receiver for each light?
- No, if your Nanlite fixtures already have built-in NANLINK, they can receive the signal directly from the WS-TB-1. You do not need an additional receiver per light.
- Can I use the WS-TB-1 with any LED light?
- Only with Nanlite fixtures that support NANLINK. Check your light's specs. If it does not have NANLINK, you would need a different control solution. Before buying, verify that your lights are NANLINK-compatible.
- Does the WS-TB-1 require its own power?
- Yes, the WS-TB-1 needs a power connection, and the power cable is sold separately. Plan for this when setting up.
- Is the WS-TB-1 a wireless DMX transmitter?
- Not exactly. It bridges a wired DMX signal to the NANLINK wireless protocol. Your console still connects via DMX cable, and the light control is then transmitted wirelessly to the fixtures.
Product Facts
- Nanlite NANLINK WS-TB-1 Transmitter Box for LED Light Fixtures: The Nanlite NANLINK WS-TB-1 bridges NANLINK-compatible fixtures to a wired DMX network. This lets a lighting console drive a group of Nanlite lights without needing a DMX cable to each fixture, simplifying cabling.
Nanlite NANLINK WS-TB-1 Transmitter Box for LED Light Fixtures
