Getting Started with Your Teris TS1610CF-Q
The Teris TS1610CF-Q 2-Stage Carbon Fiber Tripod is a lightweight, sturdy support designed for field and studio use. This guide walks you through the basic setup steps, from unpacking to leg lock adjustment, so you can confidently mount your camera and start shooting. Before you begin, confirm fit and compatibility with your kit by contacting the Filmgear Canada showroom team.
Step-by-Step Assembly
Follow these steps to assemble your Teris TS1610CF-Q tripod.
- Unpack and Inspect: Remove the tripod from its packaging. Check that all parts are present and free of damage. The TS1610CF-Q is a 2-stage carbon fiber tripod, so you should see three leg sections per leg, each with twist locks.
- Extend the Legs: Loosen the twist locks on each leg section. Extend the leg to the desired height, then tighten the lock firmly. Repeat for all three legs. The 2-stage design means you can adjust height in two increments per leg.
- Set the Leg Angle: Each leg has an angle adjustment mechanism near the top. Press the release and set the leg to one of the preset angles. For a low-angle shot, spread the legs wide; for normal height, use a narrower stance.
- Mount Your Camera or Head: Attach your tripod head (sold separately) to the center column using the standard 3/8" thread. Then mount your camera to the head. Ensure all connections are tight before releasing the camera.
Adjusting the Leg Locks
The TS1610CF-Q uses twist locks on each leg section. To adjust, rotate the lock counterclockwise to loosen, slide the leg to the desired position, then rotate clockwise to tighten. Do not overtighten—firm hand-tight is sufficient. If a lock feels loose or sticky, check for debris on the threads and clean with a dry cloth. The supplied information does not specify torque values, so use reasonable hand force.
Carbon Fiber Tripod Care
Carbon fiber is strong and lightweight but can be damaged by impacts or abrasive materials. After use, wipe down the legs with a damp cloth to remove dirt and salt. Avoid using harsh solvents. Store the tripod in a dry, padded bag. The TS1610CF-Q is available at Filmgear Canada in Vancouver; order online for Canada-wide shipping.
Product Facts
- Teris TS1610CF-Q 2-Stage Carbon Fiber Tripod: Teris TS1610CF-Q 2-Stage Carbon Fiber Tripod is a Teris product in our Tripods range. Identifies the exact model and category for compatibility checks.

Teris TS1610CF-Q 2-Stage Carbon Fiber Tripod - Teris TS1610CF-Q 2-Stage Carbon Fiber Tripod: It is available at Filmgear Canada in Vancouver. Order online with Canada-wide shipping, or contact our showroom team to confirm fit and compatibility with your kit. Provides purchasing and support options, including fit confirmation before buying.


