Teradek Bolt 6 Monitor Module 750 TX Setup Guide

By Filmgear Canada | Published: 2026-10-30

Category: How-to Guides

Learn how to set up the Teradek Bolt 6 Monitor Module 750 TX with a SmallHD Smart 7 monitor for reliable wireless video on set.

Quick answer

Attach the Teradek Bolt 6 Monitor Module 750 TX to a compatible SmallHD Smart 7 monitor, pair it with a Bolt 6 transmitter, and configure the channel and output settings via the monitor's touchscreen.

Before you start: compatibility and power

The Bolt 6 Monitor Module 750 TX is designed for SmallHD Smart 7 series monitors, including the Cine 7, Indie 7, and 702 Touch. It mounts directly onto the monitor's battery plate and draws power from the monitor's battery, so no separate power source is needed. However, ensure your monitor's battery has enough charge for the entire shoot, as the module adds a small power draw.

The module works as a transmitter, sending video from the camera to a Bolt 6 receiver. It does not receive video itself, so you'll need a separate Bolt 6 transmitter on the camera side if you want to monitor wirelessly. If you're using it as a director's monitor, pair it with a Bolt 6 receiver on the camera side.

Step-by-step setup

Attach the module to the monitor: Slide the Bolt 6 Monitor Module onto the back of your SmallHD Smart 7 monitor's battery plate until it clicks into place. Secure it with the locking screw if provided. A common mistake is not fully seating the module, which can cause intermittent power or signal loss. Double-check the click.
Power on the monitor and verify module recognition: Power on the monitor. The module should appear as a connected device in the monitor's settings menu. If not, reseat the module and check the battery connection. If the module isn't recognized, the monitor's firmware may need an update. Check SmallHD's support site for the latest version.
Pair with a Bolt 6 transmitter: On the monitor, go to the wireless settings menu and select 'Pair' or 'Sync'. Press the pairing button on your Bolt 6 transmitter (e.g., on the camera side) within 30 seconds. The monitor will display a confirmation once paired. Pairing range is critical: keep the transmitter and module within 3 feet during pairing. A common mistake is trying to pair from across the room.
Configure channel and output settings: In the monitor's wireless menu, select a channel that avoids interference from other wireless devices on set. Choose between 5GHz and 6GHz bands if available. Set the output resolution and frame rate to match your camera's feed. Using the 6GHz band reduces interference but may have shorter range. Test both bands in your shooting environment.
Test the wireless link: Walk with the monitor to the farthest distance you expect to use (up to 750ft line-of-sight). Check for dropouts or latency. Adjust the antenna orientation on both the module and transmitter for best signal. If you experience dropouts, try a different channel or move closer. The 750ft range is under ideal conditions; real-world range is often shorter due to obstacles.

Product facts

Teradek Bolt 6 Monitor Module 750 TX for Smart 7 Series Monitors: The Teradek Bolt 6 Monitor Module 750 TX integrates a Bolt 6 transmit path with compatible SmallHD Smart 7 monitors. This eliminates the need for a separate transmitter body and cable, reducing weight and clutter on your monitor setup.
Teradek Bolt 6 Monitor Module 750 TX for Smart 7 Series Monitors