Back to Blog
How-to Guides 2026-11-16 Filmgear Canada 0 views

SHAPE ARRI Dovetail Shoulder Mount: Balance and Setup Tips

SHAPE ARRI Dovetail Shoulder Mount: Balance and Setup Tips

Learn how to balance and set up the SHAPE ARRI Dovetail Shoulder Mount for handheld and shoulder-mounted production, with practical checkpoints from the supplied product record.

Start with the interface, then balance

The SHAPE ARRI Dovetail Shoulder Mount (model DOVSM) is a camera shoulder rig built for balanced handheld and shoulder-mounted production. Before you adjust anything, confirm that your camera and bridge plate match the mount's interface: it is compatible with ARRI style bridge plates in 15mm LWS, 15mm Studio, and 19mm Studio standards. That compatibility is the foundation for a stable, repeatable setup.

Once the interface is confirmed, the balancing process uses the mount's sliding bridge plate and dovetail section. The bridge plate slides front to back and locks in the desired position with the side lever. The pad underneath the dovetail section can also be adjusted. These two adjustments let you shift the camera's center of gravity over your shoulder without adding counterweights.

Key measurements for balancing

  • SHAPE ARRI Dovetail Shoulder Mount: The dovetail section is 12-1/2 inches long and allows 10-1/2 inches of travel. That travel range gives you room to fine-tune fore-aft balance for different camera and lens combinations.
    SHAPE ARRI Dovetail Shoulder Mount
    SHAPE ARRI Dovetail Shoulder Mount
  • SHAPE ARRI Dovetail Shoulder Mount: Spring-loaded stoppers are included at the front and back of the shoulder mount to prevent the top bridge plate from sliding. These stoppers act as safety limits so the bridge plate cannot slide off the dovetail during adjustment or use.

Balance the rig in four steps

Work through these steps with your camera, lens, and any accessories attached, since the balance point changes with the full payload.

  1. Mount the camera to the bridge plate: Attach your camera to an ARRI style bridge plate that matches your rod standard (15mm LWS, 15mm Studio, or 19mm Studio).
  2. Slide the bridge plate to find the balance point: Loosen the side lever and slide the bridge plate front to back until the rig feels neutral on your shoulder. Lock the side lever to secure the position.
  3. Fine-tune with the dovetail pad: If you need more adjustment, use the pad underneath the dovetail section to shift the balance point further.
  4. Check the stoppers: Make sure the spring-loaded stoppers at the front and back are in place. They prevent the top bridge plate from sliding beyond the dovetail section.

Use the side lever for quick changes

The side lever is the main control for adjusting the bridge plate position. When you need to rebalance—for example, after changing lenses or adding a monitor—loosen the lever, slide the plate, and lock it again. To release the bridge plate entirely, push the button. This makes it practical to reconfigure the rig between takes or between different camera setups.

Checks before you order

The SHAPE ARRI Dovetail Shoulder Mount is a model-specific option. Confirm these points so the mount fits your production workflow.

  • Bridge plate standard: Verify that your bridge plate is ARRI style and matches one of the supported standards: 15mm LWS, 15mm Studio, or 19mm Studio.
  • Camera and lens clearance: Check the physical dimensions of your camera, lens, and accessories against the mount to ensure there is no interference.
  • Package contents: The box contains one SHAPE ARRI Dovetail Shoulder Mount. Use the manufacturer SKU DOVSM to distinguish it from similar versions.
  • Handles and accessories: The mount is compatible with a variety of handles, but confirm the specific handle interface if you plan to add one.

When this shoulder mount is the right choice

Choose the SHAPE ARRI Dovetail Shoulder Mount when you need a balanced handheld or shoulder-mounted setup and your rig already uses ARRI style bridge plates in 15mm LWS, 15mm Studio, or 19mm Studio. Its 12-1/2-inch dovetail and 10-1/2 inches of travel give you generous adjustment for balancing different camera builds.

If low weight is your top priority, a smaller handheld cage may be more appropriate. If you need broadcast-style balance and rapid tripod docking, a heavier VCT and shoulder system could be a better fit. The DOVSM sits in the middle: a dedicated shoulder mount with a sliding balance system for ARRI standard rigs.

Related Articles

Customer Service
Home
Products
Cart
Profile