Start with the package, not the fixture
The NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case is a matched pair of Evoke 150C fixtures packed for film, broadcast, studio, and location work. Because the title names a kit and a case, the exact package configuration matters as much as the light itself. The manufacturer SKU is Evoke150C2KIT, and that is the identifier to quote when you compare listings or check compatibility.
This guide covers what the supplied information confirms about the kit, how the two lights fit a two-person interview or small studio setup, and which details you should verify before ordering. Where the supplied record does not state a specification, treat it as an open question rather than assuming a feature.
What the kit record confirms
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: The kit includes two high-performance Evoke 150C fixtures along with essential accessories, and ships in a plastic trolley case. Two fixtures are the basis for a key-and-fill interview setup, and the trolley case is the transport and storage solution for location work.

NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case - NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: Each unit has an integrated design with no external ballast. Fewer separate boxes to rig and cable means faster setup and a simpler packing list when you move between locations.
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: The Evoke 150C uses Nanlux's Nebula C8 8-chip LED engine, blending deep red, red, amber, lime, green, cyan, blue, and indigo LEDs for color accuracy and a wide gamut. The color system is the reason to choose this fixture for interviews where skin tones and consistent white light matter.
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: Color temperature is adjustable from 1000K to 20,000K with ±200 green/magenta tint correction. That range covers warm tungsten-style interiors through daylight and beyond, and the tint control lets you match other sources on set.
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: Output is up to 22,230 lux at 3.3 feet (1 meter) with the included 45° reflector. This gives you a concrete brightness reference for judging whether the fixture suits your throw distance and modifier choices.
Setting up the two-light kit for an interview
- Unpack and confirm both fixtures and accessories: The kit is built around two Evoke 150C units plus essential accessories. Check that both fixtures and the included 45° reflector are present before you leave for a shoot, since the record names the reflector as part of the output specification.
- Place the key and fill: With two fixtures, the natural interview layout is one light as key and one as fill or background. The integrated design with no external ballast means each unit can be positioned and powered without a separate ballast box.
- Set color temperature and tint: Dial the CCT between 1000K and 20,000K to match the ambient light or your intended look, then use the ±200 green/magenta tint correction to align with other sources. The Nebula C8 engine is designed to hold color consistency across the range.
- Check output against your distance: The 22,230 lux figure at 3.3 feet (1 meter) with the 45° reflector is your reference point. If your lights sit farther back or you add diffusion, plan for the corresponding drop rather than assuming the same level.
- Pack back into the trolley case: The plastic trolley case is the designated transport for the kit. Keep the two fixtures and accessories organized in it between shoots so the package stays complete.
Why a dual bi-color kit suits interviews
A two-light kit solves the most common interview lighting problem: you need a key and a fill, or a key and a background accent, from one consistent source. Because both fixtures are Evoke 150C units, they share the same color engine and control range, which makes matching them straightforward. The wide CCT range and tint correction let you adapt to a window-lit room or a tungsten interior without swapping gels.
The integrated, ballast-free design also matters on location. Fewer components mean fewer cables to run and less to pack, which is why the trolley case format makes sense for crews moving between rooms or venues.
What to verify before you order
- Exact model and SKU: Confirm the listing names Evoke150C2KIT and describes a two-light kit with a plastic trolley case. Similar Nanlux configurations exist, so the full model name and SKU are the reliable identifiers.
- Mount and rig compatibility: The supplied record does not specify the fixture's mount or yoke details. Check the exact mount, stand interface, and required clearance against your stands and rig before ordering.
- Power requirements: The record does not state input voltage, power draw, or battery options. Confirm the power configuration you need with the manufacturer documentation or the store before you commit.
- Control and interface: The record describes the color system but not the control protocol or connector types. If you plan to control the lights from a console or app, verify the supported interfaces first.
- Case contents beyond the fixtures: The kit includes essential accessories, but the supplied information does not list every item. Ask for the full in-box list if you need to know whether stands, cables, or modifiers are included.
Kit identity at a glance
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: Brand: Nanlux. Manufacturer SKU: Evoke150C2KIT. Configuration: two Evoke 150C fixtures with accessories in a plastic trolley case. Use these identifiers to distinguish this kit from single-fixture or differently packaged Evoke 150C listings.
- NANLUX Evoke 150C 2-Light Kit with Plastic Trolley Case: The kit is intended for film, broadcast, studio, and location lighting. That scope tells you the kit is designed for production environments rather than casual use, which shapes how you plan power, transport, and rigging.


