How to Install DJI Mavic 4 Pro ND Filters

By Filmgear Canada | Published: 2026-10-23

Category: How-to Guides

Learn how to install ND filters on the DJI Mavic 4 Pro, including the 180-degree shutter rule and avoiding common mistakes.

Quick Answer

To install ND filters on the DJI Mavic 4 Pro, power off the drone, gently twist the stock filter counterclockwise to remove it, align the new ND filter's tabs with the lens mount, and twist clockwise until it clicks. Always verify the filter is secure before takeoff.

Why Use ND Filters on Your Mavic 4 Pro?

ND filters reduce the light entering the sensor, allowing you to keep the shutter speed at twice the frame rate (the 180-degree rule) even in bright conditions. This produces natural motion blur in videos, avoiding the harsh, staccato look of fast shutter speeds.

The Mavic 4 Pro's camera is capable of high-quality footage, but without ND filters, you'll often be forced to use fast shutter speeds in daylight, resulting in choppy video. The DJI Mavic 4 Pro ND Filters Set (ND8/16/32/64) covers the range from overcast skies to bright sun, so you can always maintain the correct exposure.

Installation Steps

Power off the drone: Ensure the Mavic 4 Pro is completely powered off before touching the camera lens. This prevents any accidental motor movement or sensor damage. Double-check the drone is off and the propellers are not spinning.
Remove the stock filter: Gently grip the stock UV filter and twist it counterclockwise (to the left) until it loosens. Lift it straight off the lens mount. If it feels stuck, apply even pressure and avoid forcing it. Never use tools; only hand pressure to avoid damaging the threads.
Align the ND filter: Take the ND filter you need (e.g., ND8 for overcast, ND64 for bright sun) and align its two small tabs with the notches on the drone's lens mount. The filter should sit flush. Check that the filter is not cross-threaded; it should slide on without resistance.
Twist to lock: Twist the filter clockwise (to the right) until it clicks into place. A secure click indicates it's properly locked and won't fall off during flight. Give the filter a gentle tug to confirm it's locked before flying.
Set your camera settings: Power on the drone, go to camera settings, and set the frame rate (e.g., 30fps). Then adjust the shutter speed to 1/60s (double the frame rate) and use the ND filter to achieve correct exposure. Use the histogram to check exposure; the filter should bring you to the right shutter speed without overexposing.

Product Fact

DJI Mavic 4 Pro ND Filters Set (ND8/16/32/64): The DJI Mavic 4 Pro ND Filters Set includes ND8, ND16, ND32, and ND64 filters, designed to fit the Mavic 4 Pro's camera. These four densities let you adapt to different lighting conditions, ensuring you can hold the 180-degree shutter rule from overcast to bright sunny days.
DJI Mavic 4 Pro ND Filters Set (ND8/16/32/64)