Back to Blog
How-to Guides 2026-11-01 Filmgear Canada 0 views

Hollyland LARK MAX 2 Combo: 4-Person Wireless Mic Setup Guide

Hollyland LARK MAX 2 Combo: 4-Person Wireless Mic Setup Guide

Set up the Hollyland LARK MAX 2 Combo for four-person interviews and panels. Pair transmitters, connect to camera or phone, and avoid common mistakes.

Quick answer

To set up the Hollyland LARK MAX 2 Combo for a four-person shoot, power the receiver and all four transmitters, pair each transmitter to the receiver, then connect the receiver to your camera or mobile device using the appropriate cable. Test each mic before recording and label transmitters by speaker.

Why the 4-person configuration changes your workflow

The LARK MAX 2 Combo includes four transmitters and one receiver in a single bundle, so you can mic four speakers at once without renting a second kit. That changes how you manage channels, batteries, and cable runs compared to a two-person setup. Plan for more time to label and test each transmitter before the session starts.

Camera vs. mobile: which connection to use

The receiver can connect to cameras and mobile devices, but the cable and adapter you need depend on your recording device. Check your camera's audio input type and your phone's port before the shoot. If you are recording to a phone, confirm whether you need a Lightning or USB-C adapter. The LARK MAX 2 Combo does not include every possible adapter, so verify what is in the box for your region.

Step-by-step setup for the LARK MAX 2 Combo

  1. Charge and power all units: Fully charge the receiver and all four transmitters before the shoot. Power on the receiver first, then each transmitter. Common mistake: assuming the kit arrives charged; check battery levels the night before. Label each transmitter with a number or speaker name as you power it on.
  2. Pair each transmitter to the receiver: Put the receiver in pairing mode and pair transmitters one at a time. Confirm each transmitter's signal appears on the receiver display. Common mistake: pairing multiple transmitters at once can cause confusion; do them sequentially. Verify all four transmitters show a stable connection before moving on.
  3. Connect the receiver to your camera or mobile device: Use the correct audio cable for your camera (e.g., 3.5mm TRS to TRS) or the appropriate adapter for your phone. Plug the receiver into the camera's mic input or the phone's port. Common mistake: using the wrong cable type (TRS vs. TRRS) can result in no audio or mono-only recording; check your device's input. If using a phone, confirm the adapter is firmly seated and the phone recognizes the receiver.
  4. Set gain levels and test each mic: Have each speaker talk at their normal level while you monitor audio through headphones. Adjust the receiver's gain or the camera's input level to avoid clipping. Common mistake: setting gain too high causes distortion; aim for peaks around -12 dB to -6 dB. Record a 30-second test and play it back to confirm all four channels are clean.
  5. Secure transmitters and manage cables: Clip transmitters to clothing with the lavalier mic positioned 6–8 inches below the chin, avoiding fabric rustle. Use cable clips to keep wires tidy. Common mistake: letting the mic rub against clothing creates noise; use the included windscreens and clips. Do a final visual check that no transmitter is hidden under clothing or blocked.

Product facts

Related Articles

Customer Service
Home
Products
Cart
Profile